Monitoring Switcher 1602HD

16x2 HD-SDI/SDI video routing switcher

		Overview: Sierra Video Systems line of HD, digital and analog routing switchers are a perfect solution for video environments that need to keep tabs on multiple video sources. These one- and two-output routing switchers are an ideal fit for high volume broadcast and post-production facilities where signal monitoring and/or maintenance are crucial.   Print Datasheet Datasheet Software Manual CAD

Features:

• Broadcast studios
• Post-production facilities
• Remote trucks
• Duplication houses

Optional Configurations :

Monitoring Switcher 1602HD — 16 x 2 HD-SDI/SDI routing switcher
Monitoring Switcher 1602HDE — 16 x 2 HD-SDI/SDI routing switcher + 1-channel AES/EBU audio
Monitoring Switcher 1602HDEE — 16 x 2 HD-SDI/SDI routing switcher + 2-channel AES/EBU audio
Monitoring Switcher 1602HDS — 16 x 2 HD-SDI/SDI routing switcher + analog stereo audio

Performance Specifications:

HD-SDI/SDI Multi-Rate Digital Video

Data Rates: 19Mbps – 1.485Gbps
Data Types: SMPTE 310M, SMPTE 259, SMPTE 344M, SMPTE 292M, DVB-ASI, ITU-R BT.601
Jitter: <0.2 UI

Input
Video Level: 800mV p-p +/-10%
Impedance: 75 Ohm
Return Loss: 30 dB @ 6 MHz
Cable Equalization Range: 0-100 meters for SMPTE 292, Belden 8281, 0-300 meters for all other standards, Belden 8281
Connector Type: BNC

Output
Video Level: 800mV p-p +/- 10%
Impedance: 75 Ohm
Return Loss: 30 dB @ 6 MHz
Rise/Fall Times: < 270psec
Connector Type: BNC

Analog Audio
Voltage Gain Unity: +/- 0.75dB max (+- 0.25 typical)
Frequency Response: 20Hz to 20KHz +- 0.5dB (typical -3dB @ 120KHz) (unity gain)
Dynamic Range: 96dB (20-20KHz unweighted) (unity gain)
Crosstalk: < -80 dB @ 1KHz (unity gain), < -60dB @ 10KHz (unity gain)
THD: < 0.025% (20Hz - 20KHz @ +4 dBu) (unity gain)
IM: < 0.025 SMPTE-DIN @ +4 dBu (unity gain), < 0.01 % CCIF @ +16 dBu (unity gain)

Input
Maximum Source Level: +24dBu balanced
Impedance: > 20K
Connector Type: 6-pin terminal block for balanced or unbalanced operation

Output
Maximum Source Level: +24dBu balanced, +18dBu unbalanced
Impedance: < 47 Ohm
Audio Connectors: 6-pin terminal block for balanced or unbalanced operation

Control

Serial: General Purpose 9 pin-D for RS-232, 9600, 38400, 115200 baud
Serial Protocols: SVS host, simple Kramer, and select others
Ethernet: 10BaseT, full-duplex, RJ-45 connector
Redundant Control Processor: N/A
Control Panels: Supports SCP programmable control panels, XY & single bus control panels

General

Rack Unit Size/Frame: 1RU
Dimensions: 19”w x 1.75”h x 19”d
Power: 90-240 VAC 50/60Hz 64 Watts auto-ranging
Redundant Power: Optional
Storage Temperature: -40 to +150 degrees F
Operating Temperature: 30 degrees to 100 degrees F ambient
Humidity: 10% to 90 % non-condensing