Performance Specifications:
HD-SDI/SDI Multi-Rate Digital Video
Data Rates: 19Mbps - 1.485Gbps
Data Types: SMPTE 310M, SMPTE 259, SMPTE 344M, SMPTE 292M, DVB-ASI, ITU-R BT.601
Jitter: < 0.2 UI
Input
Video Level: 800mV p-p +/-10%
Impedance: 75 Ohm
Return Loss: > 15dB up to 1.5GHz
Cable Equalization Range: 0 - 100 meters for SMPTE 292, Belden 8281, 0 - 300 meters for all other standards, Belden 8281
Connector Type: BNC
Output
Video Level: 800mV p-p +/-10%
Impedance: 75 Ohm
Return Loss: > 15dB up to 1.5GHz
Rise/Fall Times: <270 psec
Connector Type: BNC
SDI/DVB-ASI Digital Video
Data Rates: 19 - 360Mbps
Data Types: SMPTE 310M, SMPTE 259M, DVB-ASI, ITU-R BT.601
Jitter: < 0.2 UI
Input
Video Level: 800mV p-p +/-10%
Impedance: 75 Ohm
Return Loss: > 15dB
Cable Equalization Range: 0 - 300 meters, Belden 8281
Connector Type: BNC
Output
Video Level: 800mV p-p +/- 10%
Impedance: 75 Ohm
Return Loss: > 15dB
Rise/Fall Times: 400 - 1500 psec
Connector Type: BNC
Analog Composite Video
Video Gain: Unity (adjustable per channel +/-1.5dB)
Crosstalk: 80dB @ 1MHz, -47dB @ 100MHz
Switching Speed: deterministic
Input
Video Level: 300mV to 2.5V p-p
Impedance: 75 Ohm nominal
Return Loss: > 15dB
Connector Type: BNC
Output
Video Level: 300mV to 2.5V p-p
Impedance: 75 Ohm nominal
Return Loss: > 15dB
Connector Type: BNC
AES/EBU Digital Audio (AES3)
Data Rates: 32KHz - 96KHz
Jitter: <0.025 UI p-p
Maximum distance: 100 m
Cable: STP
Input
Input Type: Balanced
Return Loss: 30 dB @ 6 MHz
Minimum Input: 200mV p-p
Connector Type: terminal block
Output
Audio Level: 3.5V nominal
Return Loss: 30 dB @ 6 MHz
Connector Type: terminal block
AES/EBU Digital Audio (AES3id)
Data Rates: 32KHz - 96KHz
Jitter: <0.025 UI p-p
Maximum distance: 100 m
Cable: Coax
Input
Input Type: Unbalanced
Return Loss: 30 dB @ 6 MHz
Minimum Input: 320mV p-p
Connector Type: BNC
Output
Audio Level: 1V p-p terminated (75 Ohm)
Return Loss: 30 dB @ 6 MHz
Connector Type: BNC
Analog Stereo Audio
Input Adjust Range: +20.5dB to -8dB
Output Adjust Range: +15dB to -59.5dB and fully off (MUTE)
Frequency Response: 20Hz to 20KHz +/- 0.5dB (typical -3dB @ 120KHz) (unity gain)
Dynamic Range: 96 dB (20-20KHz unweighted) (unity gain)
Crosstalk: (all inputs hostile) < -80dB @ 1KHz (unity gain), < -60dB @ 10KHz (unity gain)
THD(20 to 20 KHz): < 0.025% (20Hz - 20Khz @ +4dBu) (unity gain)
IM (20 to 20 KHz): < 0.025 SMPTE-DIN @ +4dBu (unity gain), < 0.01% CCIF @ +16dBu (unity gain)
Input
Maximum Source Level: +24dBu
Impedance: > 20K
Connector Type: 5 pin terminal block for balanced or unbalanced operation
Output
Maximum Source Level: +24dBu balanced, +18dBu unbalanced
Impedance: < 50 Ohm
Connector Type: 5 pin terminal block for balanced or unbalanced operation
Control
Serial: General Purpose 9 pin-D, switchable RS-232 or RS-422, 9600, 38400, 115200 baud
Serial Protocols: SVS host, simple Kramer, and select others
Ethernet: 10/100 Base-T, full duplex, RJ-45 connector
Ethernet Protocols: ARP, ICMP, TCP/IP, Telnet, HTTP
Web Server: For configuration and control
Redundant Control Processor: N/A
Control Panels: Supports SCP programmable control panels, XY & single bus control panels
General
Power: 90 VAC->240 VAC 50/60 HZ (<150 Watts) auto-detecting
Redundant Power Supply: Optional on 32 Series models
Storage Temperature: -40 to +150 degrees F
Operating Temperature: 30 degrees to 100 degrees F ambient
Humidity: 10% to 90 % non-condensing
Rack Unit Size/Frame
8, 12 & 16 Series’: 2RU
32 Series: 3RU
32 Series with redundant power supply: 4RU
Dimensions
8 Series: 19”w x 3.5”h x 13.7”d
12 & 16 Series’: 19”w x 3.5”h x 17.7”d
32 Series: 19”w x 5.25”h x 18.7”d
32 Series with redundant power supply: 19”w x 7”h x 18.7”d
Mounts in standard 19” rack
Depth measurements do not include front panel hardware or rear cabling
